Our Services

Lenticular Printing

Lenticular printing is a technology in which lenticular lenses (a technology that is also used for 3D displays) are used to produce printed images with an illusion of depth, or the ability to change or move as the image is viewed from different angles. Examples of lenticular printing include flip and animation effects such as winking eyes, and modern advertising graphics that change their message depending on the viewing angle. This technology was created in the 1940s but has evolved in recent years to show more motion and increased depth. Originally used mostly in novelty items and commonly called “flicker pictures” or “wiggle pictures,” lenticular prints are now being used as a marketing tool to show products in motion. Recent advances in large-format presses have allowed for oversized lenses to be used in lithographic lenticular printing.


Lenticular printing is a multi-step process consisting of creating a lenticular image from at least two images, and combining it with a lenticular lens. This process can be used to create various frames of animation (for a motion effect), offsetting the various layers at different increments (for a 3D effect), or simply to show a set of alternate images which may appear to transform into each other. Once the various images are collected, they are flattened into individual, different frame files, and then digitally combined into a single final file in a process called interlacing.

Lenticular printing has been used to produce movie posters, such as this advert for Species II, which morphs between two different character appearances when the angle of viewing changes.

From there the interlaced image can be printed directly to the back (smooth side) of the lens or it can be printed to a substrate (ideally a synthetic paper) and laminated to the lens. When printing to the backside of the lens, the critical registration of the fine “slices” of interlaced images must be absolutely correct during the lithographic or screen printing process or “ghosting” and poor imagery might result. Ghosting also occurs on choosing the wrong set of images for flip.

The combined lenticular print will show two or more different images simply by changing the angle from which the print is viewed. If more (30+) images are used, taken in a sequence, one can even show a short video of about one second. Though normally produced in sheet form, by interlacing simple images or different colors throughout the artwork, lenticular images can also be created in roll form with 3D effects or multi-color changes. Alternatively, one can use several images of the same object, taken from slightly different angles, and then create a lenticular print which shows a stereoscopic 3D effect. 3D effects can only be achieved in a side to side (left to right) direction, as the viewer’s left eye needs to be seeing from a slightly different angle than the right to achieve the stereoscopic effect. Other effects, like morphs, motion, and zooms work better (less ghosting or latent effects) as top-to-bottom effects, but can be achieved in both directions.

There are several film processors that will take two or more pictures and create lenticular prints for hobbyists, at a reasonable cost. For slightly more money one can buy the equipment to make lenticular prints at home. This is in addition to the many corporate services that provide high volume lenticular printing.

There are many commercial end uses for lenticular images, which can be made from PVC, APET, acrylic, and PETG, as well as other materials. While PETG and APET are the most common, other materials are becoming popular to accommodate outdoor use and special forming due to the increasing use of lenticular images on cups and gift cards. Lithographic lenticular printing allows for the flat side of the lenticular sheet to have ink placed directly onto the lens, while high-resolution photographic lenticulars typically have the image laminated to the lens.

Recently, large format (over 2m) lenticular images have been used in bus shelters and movie theaters. These are printed using an oversized lithographic press. Many advances have been made to the extrusion of lenticular lens and the way it is printed which has led to a decrease in cost and an increase in quality. Lenticular images have recently seen a surge in activity trading cards, sports posters and signs in stores that help to attract buyers.

The newest lenticular technology is manufacturing lenses with flexo, inkjet and screen-printing techniques. The lens material comes in a roll or sheet which is fed through flexo or offset printing systems at high speed, or printed with UV inkjet machines (usually flat-beds that enable a precise registration). This technology allows high volume 3D lenticular production at low cost.


Each image is arranged (slicing) into strips, which are then interlaced with one or more similarly arranged images (splicing). These are printed on the back of a piece of plastic, with a series of thin lenses molded into the opposite side. Alternatively, the images can be printed on paper, which is then bonded to the plastic. With the new technology, lenses are printed in the same printing operation as the interlaced image, either on both sides of a flat sheet of transparent material, or on the same side of a sheet of paper, the image being covered with a transparent sheet of plastic or with a layer of transparent, which in turn is printed with several layers of varnish to create the lenses.

The lenses are accurately aligned with the interlaces of the image, so that light reflected off each strip is refracted in a slightly different direction, but the light from all pixels originating from the same original image is sent in the same direction. The end result is that a single eye looking at the print sees a single whole image, but two eyes will see different images, which leads to stereoscopic 3D perception



by mymarcom

Promotion is one of the market mix elements or features, and a term used frequently in marketing. The marketing mix includes the four P’s: price, product, promotion, and place. Promotion refers to raising customer awareness of a product or brand, generating sales, and creating brand loyalty. Promotion is also found in the specification of fivepromotional mix or promotional plan. These elements are personal selling, advertising, sales promotion, direct marketing, and publicity. A promotional mix specifies how much attention to pay to each of the five subcategories, and how much money to budget for each. A promotional plan can have a wide range of objectives, including: sales increases, new product acceptance, creation of brand equity, positioning, competitive retaliations, or creation of a corporate image. Fundamentally, there are three basic objectives of promotion. These are:

1.   To present information to consumers as well as others.

2.   To increase demand.

3.   To differentiate a product.

There are different ways to promote a product in different areas of media. Promoters use internet advertisements, special events, endorsements, and newspapers to advertise their product. Many times with the purchase of a product there is an incentive like discounts (i.e., coupons), free items, or a contest. This method is used to increase the sales of a given product.

The term “promotion” is usually an “in” expression used internally by the marketing company, but not normally to the public or the market – phrases like “special offer” are more common. An example of a fully integrated, long-term, and a large-scale promotion are My Coke Rewards and Pepsi Stuff. The UK version of My Coke Rewards is Coke Zone.

Promotions are also held in physical environments at special events such as concerts, festivals, trade shows, and in the field such as in grocery or department stores. Interactions in the field (i.e., grocery and department stores), allow customers to purchase the brand or product immediately. The interactions among the brand and the customer are performed by brand ambassadors or promotional models[5] that represent the products and brands in physical environments. Brand ambassadors or promotional models are hired by marketing companies that are hired by the brand to represent the product and/or service. Person-to-person interaction, as opposed to media-to-person involvement, establishes connections that add another dimension to promotion. Building a community through promoting goods and services can lead to brand loyalty.

Promotional activities to push a brand enabling social media channels to spread content making something viral such as the advertising by Coke using the release of a newBond film creating a huge amount of attention which then gets promoted across all social channels by people spreading the information due to excitement. Social media, as a modern marketing tool, offers opportunities to reach larger audiences in an interactive way. These interactions allow for conversation rather than simply educating the customer. Facebook, Twitter, LinkedIn, Pinterest, Google Plus, Tumblr and Instagram are rated as some of the most popular social networking sites. As a participatory media cultures, social media platforms or social networking sites are forms of mass communication that through media technologies allow large amounts of product and distribution of content to reach the largest audience possible. However, there are downsides to virtual promotions as servers, systems, and websites may crash, fail, or become overloaded. With promotion through participatory media, there is an opportunity to gain social capital.

Promotion can be done by different media, namely print media which includes Newspaper and magazines, Electronic media which includes radio and television, Digital media which includes internet, social networking and social media sites and lastly outdoor media which includes banner ads, OOH (out of home). Digital media is a modern way of brands interacting with consumers as it releases news, information and advertising from the technological limits of print and broadcast infrastructures. Mass communication has led to modern marketing strategies to continue focusing on brand awareness, large distributions and heavy promotions. The fast-paced environment of digital media presents new methods for promotion to utilize new tools now available through technology. With the rise of technological advances, promotions can be done outside of local contexts and cross geographic borders to reach a greater number of potential consumers. The goal of a promotion is then to reach the most people possible in a time efficient and a cost efficient manner.

Offset Printing

Offset Printing

by mymarcom

Offset printing is a commonly used technique in which the inked image is transferred (or “offset”) from a plate to a rubber blanket, then to the printing surface.

When used in combination with the lithographic process, which is based on the repulsion of oil and water, the offset technique employs a flat (planographic) image carrier on which the image to be printed obtains ink from ink rollers, while the non-printing area attracts a water-based film (called “fountain solution”), keeping the non-printing areas ink-free.

The modern “web” process feeds a large reel of paper through a large press machine in several parts, typically for several metres, which then prints continuously as the paper is fed through.